Italian marble tiles is widely loved for its noble and elegant charm.However,carrara marble countertops is highly polluting,so antifouling measures must be done very well. In addition, what should we do with carrera marble countertops that has penetrated the stain? This article tells you how to remove white marble that has penetrated the stain.
Solution one:
It is recommended to use stone-specific products, such as strong concentrated cleaning agents, with a pH of about 10.5. These products can decompose organic contamination on the white marble tiles surface and remove surface-type protective agents. If necessary, the cleaning agent can be mixed with the decontamination powder to extend the reaction time of the compound and adsorb the stain into the paste. Before using the compound, test small areas that are not conspicuous, such as corners, and make sure that the surface of the italian marble stone is not covered with dark black marks. Clearing the slight scratches is relatively easy, and there are many polishing powders on the market. However, when using polishing powder, it is necessary to use a polishing machine or a single wiper.
Solution two:
It is recommended to use a liquid drug, preferably a two-component enzyme cleaner that penetrates into the stone bottom layer and filters dirt and dirt onto the surface. Enzymes are especially effective against plant stains. Such cleaners are available from high quality white marble countertops cleaner product distributors.
If the effect of using this method is still not obvious, it is recommended to mix the solution of the enzyme cleaning agent with the decontamination powder until a viscous ointment similar to peanut butter is formed. Apply the mixed ointment to the contaminated area, cover it with a plastic film, and seal it with a tape. The reaction time was maintained for 24 to 72 hours, and then the dried ointment was scraped off with a small bamboo board. Repeat if necessary. Once the contamination has been removed, it is recommended to use a permeable protective agent to protect the white marble flooring from future contamination. If the stained marble surface has scratches at the same time, it needs to be polished. The choice of abrasive powder needs to be determined by the construction party, which may be brick, cinder, sandpaper or corundum. The process can be complicated, so it is advisable to have it handled by a professional. It should be clear that for some 305 X 305 X 10mm plates, the damage from high heels may also penetrate deep into the white marble slab and may be difficult or almost impossible to scratch. In this case, it is best to seek the assistance of an expert.
Solution three:
Regarding the stains on the italian marble flooring around the tub and on the edge of the window sill, the problem should be that the marble has never been protected or improperly maintained. Since the mild detergent is not effective, we recommend using a neutral detergent to mix the powder into a viscous mixture of the mud, apply the paste to the surface of the white marble kitchen, and then rub it with a nylon pad. The powder acts like an abrasive in it to help remove stubborn stains from the surface. If this method does not work, it is recommended to use an alkaline cleaner mixed with the clay powder to form a strong detergent solution. The remaining operation steps are as described above.
When it comes to scratches on the ground, it is recommended that professionals come to the site to see and re-polishing the italian marble tiles surface. Since re-polishing and sanding usually requires the use of liquid or powder products, or diamond polishing pads, it is best for professionals to operate them. You can inquire with local white marble stone producers or distributors, and ask them to recommend more well-known white marble kitchen countertops care products and handle them professionally.
Bathroom carrara marble tile yellowing solution
Italian marble tiles often have problems such as looseness and shedding during use. Because the cement mortar used in the pasting of tiles is not fast enough, and it is in a humid environment for a long time, it is easy to loosen and fall off. There is a method of using a resin-type adhesive to bond tiles, the strength can not only reach or exceed the strength of the body of the tile, and it will not fall off in a humid environment for a long time.
The carrara marble countertops in the bathroom are often stained with greasy, rust, soap and so on. In order to keep the porcelain surface clean and not damage the porcelain surface, you can use a multi-purpose decontamination cream to clean. As for the gap between the carrera marble countertops, you can use a brush to remove the dirt with a little decontamination paste, and then apply a waterproofing agent in the gap, so that it can not prevent water seepage and prevent mold growth. It is worth mentioning that the cleaning and disinfecting agents used in large quantities in the home contain chemical substances such as acids and bases that have a great influence on natural stone, which adversely affect the color of the stone surface and the internal mineral components. What is especially serious is that most cleaning agents must react on the surface of the stone for at least five minutes to have an effect. However, during this time, the cleaning agent is already destroying the white marble bathroom, so the surface of the cleaning white marble floor tiles should be neutral. detergent.
The acidic cleaner removes the limestone, cement stains, scales, and intractable urine stains and oxidized metal stains commonly found in toilets, such as acidified cleaners.
The alkaline cleaner removes all kinds of animal and vegetable grease stains and mechanical oils, and removes the wax layer on the ground. Such as special strengthening oil cleaner; strong waxing water. If the acid-alkaline detergent is used improperly, it will cause the waste of the cleaning agent, and it will damage the surface of the cleaning object to varying degrees, and may even cause damage to the skin or eyes of the user. Therefore, we should pay attention to the following points when using acid-acid detergents:
To be clear about its use and contraindications, read the instruction manual carefully before use, or consult the supplier for detailed instructions.
Before use, make a small sample test in an inconspicuous place, and confirm that it will not be used to dilute the cleaning solvent according to the true dilution ratio. If necessary, wear eye protection when necessary.Avoid contact with the skin or eyes. The detergent should not stay too long on the italian marble tiles surface of the cleaning object. After use,carrara marble countertops should be cleaned with water.Cannot be used on carrera marble countertops surfaces that are sensitive to acids and alkalis, such as certain cleaners that have a destructive effect on surfaces such as marble, glass, and metal.
