Jun 21, 2019 Viewed: 15166

Precautions in the process of loading and unloading dolomite marble tile

Dolomite marble tile is extremely fragile in the process of handling and handling.If you accidentally lose a lot,you will share with you some things that should be paid attention to during the types of marble slabs handling process. How to avoid unnecessary and unnecessary dangers of marble tiles design.

Preparation before handling

Precautionary and prepared. In order to be safe and free from loss, it can be prepared according to different conditions, according to product size, quality, distance, and different modes of transportation.

· If the large-size sheet is made of hard wood, it is firmly nailed.

· Strips can be bundled with wooden slats and shovel.

· Shaped products and handicrafts should be packed in cartons and wooden boxes to protect sharp corners.

· It is strictly forbidden to bundle colored plastic and straw rope for white and easily contaminated products.

· The packaging needs to be firm and easy to handle.

· A box number and a list of attached boxes should be written on the box.

· Pack in plastic film to prevent rain.

· Foam support should be used for the surface of the workpiece. Two crossbars should be added to the bottom of the package for loading and unloading. Should the packaging be firm?

Pay attention when applying crane or plug-in

· The wire rope is firm and can be placed according to the size of the plate when hanging the wire rope.

· The hook should be in the center position, and the skew should be heard. When pulling the rope, it should be refreshed and not hard to prevent the surface of the sheet from being scratched.

· The operator must concentrate and prohibit idlers from approaching;

· When loading and unloading stones with a crane, check the buildings with high-voltage power lines and obstacles.

· Do not swing when the stone is suspended in the air by the crane.

Short-distance use of small trailers in the marble tiles design, cargo yard, machine room, and living room. The length of the car should be suitable for the dolomite marble tile, the frame and the tire should be intact, and the handling should be smooth. Before loading and unloading, the types of marble slabs should be lifted up and down during manual handling. Porters should wear gloves and do not wear slippers.

Cars are transported in the most forms and there are many accidents.

The trains that are carried, the general, and the large tonnage cars can be roughly divided into containers and sealed containers. It is strictly forbidden to discharge the stone in the open air, and it should be along the running direction to reduce the loss.

· Find an experienced driver, choose a good vehicle, and don't go on the road;

· The iron frame by the stone should be firm, the height, angle and plate are suitable, and the iron frame should be neat;

· Prepare two or three steel wire ropes, do not use fiber hemp rope instead;

· Vehicles should be especially careful when encountering mountain roads, rain and snow, and windy winds. Do not bend sharply or brake.

· The small truck transports the large iron frame along the longitudinal axis of the vehicle body, and the stone balance is placed on both sides. In order to prevent the uneven weight of the vehicle body from collapsing, the wooden side of the suitable height can be used to support the top side;

· When loading, place the thick plate, the light board on the front or the bottom layer, the finished material or the thin plate on the upper layer and the back, and separate the layers with wooden strips to reduce the impact and friction;

· Passengers and cargoes are distributed, and it is strictly forbidden to carry workers on stone.

The main points to note are:

To choose a good car, especially when transporting types of marble slabs,never let the sick car go on the road. The center frame should be firm, and the car should be equipped with 2-3 wire ropes. Do not use fiber hemp ropes. If the car meets mountain roads, rain or snow, windy winds or excessive speed, it is especially careful. Do not make sharp turns or brakes. To load the dolomite marble tile, the wool board, the thick plate should be placed in front or placed on the bottom layer. The marble tiles design or sheet is placed on the upper or the back, and each layer is separated by wooden strips to reduce the impact angle and wear.


Tag

Products

We promise every finished product will beyond your expectation.

Learn more
marble mosaic marble and granite white marble tiles marble flooring price marble slab prices
CONTACT
US